Vallin

LUXA 103-360

Daugiau info:

Motion detector (PIR)
Automatic lighting control based on presence and brightness
1 channel
Ceiling installation for suspended ceilings
Mixed light measurement suitable for the control of fluorescent, incandescent and halogen lamps
Zero-cross switching for relay-saving switching and high lamp loads
Sensor head can be adjusted downwards by 45° in 15° stages thus allowing detection area to be changed to avoid switching the device on unnecessarily
Ceiling cut-out of 65 – 68 mm diameter
Easy installation via two clamping brackets
System consists of power box and sensor with plugged connection cable
Large clamping area for quick installation
Single-handed plug-in installation with captive screws
Instant start-up possible via factory preset
No unintentional adjustment due to covered up controls
Adjustable brightness switching value and switch-off delay
Sensitivity can be reduced to limit detection area
Pulse function
Test function

Operating voltage	230 V AC
Frequency	50 – 60 Hz
Stand-by consumption	~0,9 W
Light measurement	Mixed light measurement
Number of channels	1
Type of contact	NO contact
Installation type	Ceiling mounting
Setting range brightness	10 – 2000 lx Infinitely adjustable
Switching capacity light	10 A (at 230 V AC, cos φ = 1), 3 AX (at 230 V AC, cos φ = 0.3)
Detection angle	360°
Installation height	2 – 3 m
Light switch-off delay	5 s–20 min
Incandescent lamp load	1000 W
Fluorescent lamp load (conventional) parallel-corrected	400 VA 42 µF
LED lamp < 2 W	25 W
LED lamp 2-8 W	90 W
LED lamp > 8 W	100 W
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	+0 °C … +45 °C
Protection class	II
Type of protection	IP 41 (Sensor), IP 20 (power module)